Table of Contents
Advertisement
LAMPS
The following describes lamps on the server and their indications. See Chapter 2 for each location.
LAN ACCESS Lamp
The LAN ACCESS lamp is lit green when the server is connected to LAN. The lamp flashes while
the server is accessed through the LAN (for packet transmission). The numeric next to the icon
indicates the network port number on the rear panel.
STATUS Lamp
The STATUS lamp stays lit in green when the server is in successful operation. When the STATUS
lamp is unlit or lit/flashing in amber, it indicates that the server has failed.
The following table lists indications of the STATUS lamp, descriptions, and actions to take.
NOTES:
If NEC ESMPRO is installed, you can confirm the cause of a failure
by referring to the error log.
To cycle power to the server, shut down the server from the OS to
and reboot it, if available. If the shutdown from the OS is not
available, disconnect and connect the power cord to reboot the
server.
Troubleshooting 8-3
Advertisement
Table of Contents
Troubleshooting
