3.5-Inch Hard Disk Drive - NEC N8100-1417F User Manual

9-10 Upgrading Your Server

3.5-inch Hard Disk Drive

The hard disk drive bay may contain up to four hard disk drives.
IMPORTANT:
Use the hard disk drives authorized by NEC. Installing a third-party
hard disk drive may cause a failure of the server as well as the hard
disk drive. Purchase hard disk drives of the following models:
– N8150-207A (80GB, 7,200 rpm, SATA2/300)
– N8150-208A (160GB, 7,200 rpm, SATA2/300)
– N8150-209A (250GB, 7,200 rpm, SATA2/300)
– N8150-229 (500GB, 7,200 rpm, SATA2/300)
– N8150-237 (750GB, 7,200 rpm, SATA2/300)
– N8150-199 (36.3GB, 15000 rpm, SAS)
– N8150-200 (73.2GB, 15000 rpm, SAS)
– N8150-201 (146.5GB, 15000 rpm, SAS)
– N8150-226 (300GB, 15000 rpm, SAS)
Note: The SAS drive cannot coexist with SATA drive.
To use RAID 5, RAID 6, or RAID 10 with Internal RAID Controller
(equivalent to N8103-116), you need to additionally install the
optional N8103-119 RAID Upgrade Kit.
A hard disk drive having the thickness of 1 inch can be installed on each of the slots. Installing an
optional 3.5-inch HDD cage allows the server to be equipped with up to eight hard disk drives. See
"3.5-inch HDD Cage" described later for details.
Slot for additional
3.5-inch HDD cage
PORT3
PORT2
PORT1
PORT0