Table of Contents
Advertisement
15.
The Express Setup will start when you click [Perform] in [Start Express setup] step.
16.
Copy optional Mass Storage Driver module.
If you install optional Mass Storage Driver, the message will be shown.
Insert CD-ROM or floppy disk attached to the Mass Storage Driver and proceed operation
according to the message.
17.
Remove NEC EXPRESSBUILDER DVD from the optical disk drive according to the
message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.
Insert Windows Server 2003 CD-ROM into the optical disk drive.
[Agree Software License Agreement] screen appears.
18.
Read the contents carefully and click [Yes] if you do agree. If you do not agree, click
[No].
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the appropriate
value.
Installing the Operating System with Express Setup 5-17
Advertisement
Table of Contents
Troubleshooting
