Driver Installation And Advanced Settings; Lan Driver And Proset; Graphics Accelerator Driver - NEC N8100-1668F User Manual

D-20 Installing Windows Server 2008 R2

DRIVER INSTALLATION AND ADVANCED SETTINGS

This section describes on how to install and setup various standard drivers mounted on the device.
For the information on installing and setting up the driver that is not described in this section, refer
to the document attached to the driver.

LAN Driver and PROSet

Please refer to Chapter 5 "Installing and Setting Device Drivers" for Windows Server 2008 R2 to
install and setup LAN driver and PROSet.

Graphics Accelerator Driver

If you use standard graphics accelerator drivers, update your system with NEC
EXPRESSBUILDER DVD attached to your system.
Standard graphics accelerator drivers will be installed automatically.
NOTE:
The graphics accelerator driver is supported only on a server running a
full installation. Use VGA on a server running a Server Core
installation.
Observe the following procedure when you want to reinstall the driver individually.
1.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive.
If the autorun menu is displayed, close menu screen.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "setup.exe" in the following directory.
\017\win\winnt\ws2008x64\video
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER DVD from the optical disk drive, restart the
system.
<Windows Server 2008>