Mounting The Anti-Tilt Bracket - Fujitsu Siemens Computers PRIMERGY TX150 Operating Manual

Hardware Installation Setting Up the Floorstand Model
4.3.1

Mounting the Anti-tilt Bracket

For floorstand models with hot-plug power supply units the supplied anti-tilt
bracket must be fitted at the rear of the server.
Figure 4: Mounting the anti-tilt bracket
Ê Position the server on the anti-tilt bracket so the rubber feet of the server fit
into the openings of the bracket (1).
27
A26361-K879-Z102-3-7619