Convergence Adjustment - Barco R9002411 Owner's Manual

Random Access Adjustment Mode

Convergence Adjustment

Convergence adjustments affect both the horizontal and vertical
lines of the setup pattern. These adjustments are performed on
the red image while superimposed on the green image and then
on the blue image while superimposed on the green image.
The screen area is divided into 13 areas.
Use the arrow keys to move the box to the desired zone and then press ENTER to begin the
convergence adjustment. Start the convergence adjustment with zone one and continue as
mentioned in the diagram hereafter.
Use the arrow keys to make horizontal or vertical convergence adjustments in the selected zone
and then press ENTER to move the box to another zone or EXIT to return to the Convergence menu.
ENTER toggles the arrow keys between zone selection and zone adjustment .
EXIT returns to convergence menu
6 - 1 2 ___________________________________________________________________________ R5976101.02 BARCO CINE5 310102
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with or
then <ENTER>
<EXIT> to return.
13
5
12
SEL : select area
ADJ : adjust area
Toggle between
SEL and ADJ
with <ENTER>
<ENTER> continue
<EXIT> to return
green image
red image
CONVERGENCE
RED ON GREEN
BLUE ON GREEN
Select with or
then <ENTER>
<EXIT> to return.
9
11
8
4 1 2 3
6
10
7
CONVERGENCE
using
arrow keys
using
arrow keys
CONVERGE
ADJUSTMENT
70