Safety Instructions - Barco R9002411 Owner's Manual

Table of Contents

Notice on Safety

This equipment is built in accordance with the requirements of the international safety standards EN60950, UL 1950 and CSA C22.2

No.950, which are the safety standards of information technology equipment including electrical business equipment.

These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order

to protect the user or operator against risk of electric shock and energy

Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability and strength,

enclosure construction and protection against the risk of fire.

Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal operation

fails.

INSTALLATION INSTRUCTIONS

Before operating this equipment please read this manual thoroughly, and retain it for future reference. Instal-

lation and preliminary adjustments should be performed by qualified BARCO personnel or by authorized BARCO

service dealers.

OWNER' S RECORD

The part number and serial number are located at the back side of the projector. Record these numbers in the spaces provided

below. Refer to them whenever you call upon your BARCO dealer regarding this product.

PART NUMBER :

SER. NUMBER

DEALER

SAFETY INDICATION ON THE PRODUCT

FEDERAL COMMUNICATION COMMISSION (FCC STATEMENT)

This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC

Rules and EN55022.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

residential environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Note : The use of shielded cables is required to comply within the limits of Part 15 of FCC rules and EN55022.

µ All the safety and operating instructions should be read before using this unit.

µ The safety and operating instructions manual should be retained for future reference.

µ All warnings on the equipment and in the documentation manuals should be adhered to.

µ All instructions for operating and use of this equipment must be followed precisely.

R5976101.02 BARCO CINE5 310102 ___________________________________________________________________________