Start Up Of The Adjustment Mode; Adjustment Mode - Barco R9002411 Owner's Manual

5

START UP OF THE ADJUSTMENT MODE

Adjustment mode

All picture geometry and convergence adjustments are made while in the ADJUSTMENT MODE.
There are two possible ways to enter the ADJUSTMENT MODE :
a. Using the local keypad :
Press the ADJUST key. The projector displays the GENERAL ACCESS menu.
Highlight ENTER ADJUST and press ENTER to display the ADJUSTMENT MODE.
GENERAL ACCESS
6 7
4 5
1 2
Enter ADJUST
Select with
then <ENTER>
<EXIT> to return
While in the Adjustment Mode, the arrow keys (RCU) or the control keys ( local keypad ) can be used to make menu selections
and also horizontal and vertical adjustments. The ENTER and EXIT keys can be used to move forward and backwards thru the
menu structure. The ADJUST key can be used to terminate the Adjustment Mode.
There are four possible paths to follow in the Adjustment Mode :
Guided - Guided should be selected if the user intends to perform a complete alignment of the projected image. All
the necessary geometry and convergence adjustments are made in a predetermined sequence.
Random Access - Random Access should be selected if the user intends to make only a few adjustments.
Installation - Installation should be selected if the projector has been relocated and/or a different screen size is desired.
When selecting 'Installation', the user will be warned to call a qualified technician to perform the installation
procedure.
Service - Service should be selected if the user wants to delete or modify memory blocks, change password or apply
information.while in Guided or Random Access adjustment mode, the user may use an external source,
an internally generated genlocked pattern or an internally generated multifrequency cross hatch pattern, as
a set-up pattern.
Some items in the Adjustment mode are password proected. while selecting such an item, the projector asks you to enter your
password. (Password protection is only available when the Password strap on the controller module is in the ON position. Contact
a BARCO authorized technician when no password is requested during the adjustment procedure and password protection is
desired.)
Your password contains 4 digits.
b. Using the RCU :
Press the ADJUST key to display the Adjustment Mode.
Ente the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a ' x ' appears on the screen under the
ENTER PASSWORD TEXT.
When your password is correct, you get access to the Adjustment Mode.
When the password is incorrect, the message WRONG PASSWORD will be displayed. The projector stays on the previously
seleced item.
Factory programmed password : 0000
R5976101.02 BARCO CINE5 310102 ___________________________________________________________________________
SHARPNESS
ADJUSTMENT MODE
TINT
Select a path from below :
COLOR
BRIGHTNESS
RANDOM ACCESS
CONTRAST
or
Select with
<EXIT> to return
GUIDED
INSTALLATION
SERVICE
Source 1
or
then <ENTER>
Start Up of the Adjustment Mode
enter
password
xxxx
5-1