Horizontal Phase Adjustment; Raster Shift Adjustment; R5976101.02 Barco Cine5 310102 - Barco R9002411 Owner's Manual

Horizontal Phase Adjustment

Highlight H PHASE using the arrow keys and then press ENTER.
Note : No Horizontal Phase adjustment is
available on the internal # pattern.
For external sources :
If the raster shift is correctly adjusted, the H Phase text box is projected in the lower center of the raster. At that moment, the
' >< ' icon indicates the center of the raster.
Adjust the H phase control until the middle of the projected image is equal with the center of the ' >< ' icon.
Note : If the genlocked pattern was selected, the external source will be displayed.
A bar scale and a value (between 0 and 100) on the screen give a visual indication of the horizontal phase adjustment.
Use Right arrow
to correct
ENTER continues to geometry menu

Raster Shift Adjustment

The green raster must be centered both horizontally and vertically on the center of the CRT surface. To center the green raster,
look into the green lens and use the arrow keys on the RCU to move the raster.
CAUTION :
It is necessary to look into the lenses to perform these adjustments.
To avoid eye discomfort while looking into the lenses, reduce the
contrast and gradually increase the brightness level until the raster
becomes visible on the face of the CRT.
ENTER will select green raster shift adjustment
EXIT returns to Random Access adjustment mode menu

R5976101.02 BARCO CINE5 310102 ___________________________________________________________________________

><
H PHASE
50
Random Access Adjustment Mode
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
or
Select with
then <ENTER>
<EXIT> to return
><
H PHASE
50
Use Left arrow
to correct
GEOMETRY
H PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H SIZE
V LINEARITY
V SIZE
BLANKING
or
Select with
then <ENTER>
<EXIT> to return
6-5