Connecting A S-Video Source - Barco R9002411 Owner's Manual

Connections
Video input selection
a. with the RCU : press digit 1
OR
b. with the local keypad
- press ADJUST key, the General access menu is displayed on the screen
- use the control keys to highlight 1
- press ENTER to select the highlighted source
Connecting a S-Video to source 2.
Separate Y-luma/C-chroma signals for higher quality playback of
Luma / Chroma
Input Selection
a. with the RCU : press digit 2
OR
b. with the local keypad :
- press ADJUST key, the General access menu is displayed on the screen
- use the control keys to highlight 2
- press ENTER to select the highlighted source.
Connecting a RGB Analog source with sync. on green.
Connecting RGB Analog Source with Sync. on green at 15K.
Input Selection
a. with the RCU : press digit 4
OR
b. with the local keypad :
- press ADJUST key, the General access menu is displayed on the screen
- use the control keys to highlight 4
- press ENTER to select the highlighted source.
Always use an interface when a computer and local monitor have to be connected to the projector. Examples of interfaces which
can be applied :
Multifunctional Analog Interface Kit
(MAGIK)
TWIN interface
3 - 2 ___________________________________________________________________________ R5976101.02 BARCO CINE5 310102
V C R
S - VHS
R9828121 (230V)
R9828128 (120V)
R9828960 (120 - 230V)
S-VHS signals.
Audio Amplifier
GENERAL ACCESS
SHARPNESS
6 7
TINT
4 5
COLOR
1 2
BRIGHTNESS
CONTRAST
Enter ADJUST
or
Select with
then <ENTER>
<EXIT> to return
GENERAL ACCESS
SHARPNESS
6 7
TINT
4 5
COLOR
1 2
BRIGHTNESS
CONTRAST
Enter ADJUST
or
Select with
then <ENTER>
<EXIT> to return