Getting Started; Display Operation - LifeSpan Equalizer User Manual

Before starting the treadmill, attach the magnetic key to the display panel, and then
attach the clip on the other end to your clothing (above the waist). If the safety key is
removed whilst you are operation the treadmill, the machine will turn itself off.
When the treadmill is not in use, you should remove the safety key.
Store the safety key in a safe place OUT OF REACH OF CHILDREN.

3.2 Getting Started

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor shield. Ensure that
the safety key is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time.
To start the treadmill, please press 'SPEED +'. You ill hear the sound of the buzzer. To
increase and decrease the speed, you may use either speed up and down buttons or the
quick set buttons 2, 5, 8, 11 and 14. The maximum speed of the treadmill is 22km/h. To
increase and decrease the incline, you may use either incline up and down buttons or
the quick set buttons 3, 6, 9, 12 and 15.
In case of emergency, you may pull out the safety key off and the treadmill will stop
immediately.
When the exercise comes to its end, it is necessary to slow down and press 'STOP' to
stop the treadmill at once.

3.3 Display Operation:

Exercise modes: manual, mode, program
Manual exercise mode: it is a motion mode used to set the amount of exercise.
Mode motion mode: it is a motion mode set with given amount of exercise.
A. Time motion mode: it is used to set exercise time, such as 30min.
B. Distance motion mode: it is used to set motion distance, such as 3km.
LIFESPAN EQUALIZER Page 10