LifeSpan Equalizer User Manual page 8

2.
As shown in Figure 3: (1) Put the lower part of left pillar 84 into the pillar seat of base combination 79
first; (2) And then fasten left pillar 84 onto 79 by inner hexagon socket screw 1 and inner dead washer 28
in the way shown in Figure 3 and use S6 inner hexagon socket wrench for tightening; (3) Connect trunk
line 74 with trunk line 75 and then put right pillar 85 into the pillar seat of base combination 79; (4) And
finally fasten the right pillar 85 onto the base combination 79 by inner hexagon socket screw 1, and inner
dead washer 28 in the way shown in Figure 3 and use S6 inner hexagon socket wrench for tightening.
Figure 4
3. As shown in Figure 4: (1) Firstly, cut over hole of electronic meter frame 88 into the double-screw bolt
of electronic meter 66; (2) And then lock inner hexagon socket screw 13 into the screw of electronic
meter 66 respectively; and finally use S6 inner hexagon wrench for tightening.
Figure 5
LIFESPAN EQUALIZER Page 7