Getting Started - LifeSpan SPRINTER XL User Manual

STOP
In RUNNING status, press STOP button to stop running and turn to STOP status. Each
window will return to zero automatically.
In STOP status, press STOP will not work.
PROGRAM
In STOP status, press PROGRAM button to choose among P1~P12 or MANUAL
PROGRAM.
In RUNNING status, press PROGRAM to show your current working program. P0
represents the MANUAL PROGRAM.
MODE
In STOP status, when SPEED window showing 0.0, press MODE button to choose
counting up or counting down if you are in MANUAL PROGRAM mode.
In RUNNING status, press MODE will not work.
SPEED UP/ SPEED DOWN
In STOP status, press SPEED UP/ SPEED DOWN will adjust the related window value
where "SET" flash.
In RUNNING status, press SPEED UP/ SPEED DOWN to increase/decrease the speed.
Press SPEED UP/SPEED DOWN once, the speed will increase/decrease 0.1km/h. But if the
speed reaches 18.0km/h, pressing SPEED UP will no longer increase the speed, if the
speed reaches 1.0km/h; pressing SPEED DOWN will no longer decrease the speed. If you
hold the SPEED UP or SPEED DOWN keys for 1 second, the speed will increase or decrease
rapidly.
SPEED UP/ SPEED DOWN in the handrails
The button in the handrails will affect the same function as the SPEED UP/ SPEED
DOWN in the console panel.

3.6 Getting Started

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor shield. Ensure that the
safety key is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time.
LIFESPAN SPRINTER Page10