Important Electrical Information - LifeSpan Equalizer User Manual

The pulse sensors are not medical devices. Various factors, including the user's
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Use handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for
use on your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.

1.1 IMPORTANT ELECTRICAL INFORMATION

WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.
Route the power cord away from any moving part of the treadmill including the
elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for
use outdoors, near a pool, or in any other high humidity environment.
For your information, please note following electronical specification of Treadmill:
♦
Input voltage: ～240V (50HZ)
♦
Speed display scope: 1.0-22 (KM/h)
♦
Time display scope: 0：00-99：59 (minute: second)
♦
Distance display scope:
♦
Heart rate display scope:
♦
Energy display scope: 0-999 (Cal)
♦
Gradient display scope: 0-20%
0.01-99.9 (Km)
60-200 (times/min)
LIFESPAN EQUALIZER Page 3