LifeSpan Equalizer User Manual page 9

4. As shown in Figure 5: (1) Cut over the electronic meter which has been connected well in last step into
the upper parts of left and right pillars respectively; (2) And then connect link trunk line 74 with the
connecting wire of the electronic meter well; (3) And finally lock inner hexagon screw 1 by inner hexagon
socket wrench and then fix it on 84 and 85.
5. As shown in Figure 6: (1) Nest handrails 82 and 83 into electronic meter frame ( lifting at left, speed at
right); (2) And then fasten them onto electronic meter frame by inner hexagon screw 15 and get right the
foam ; (3) And finally fix the lower ends of the handrails onto the pillar by inner hexagon bolt 14.
Figure 7
6. As shown in Figure 7: (1) Nest pull tube 86 into the round tubes of left and right pillars 84 and 85; (2)
And then churn up the external foam of pull tube 86, conduct a locking by cross recessed screw 18 and a
tightening with a crossed solid wrench; (3) And finally knead the foam.
7. Check whether or not all parts have already been firmly locked. The assembly is now completed.
LIFESPAN EQUALIZER Page 8