Troubleshooting; Troubleshooting Table - LifeSpan Equalizer User Manual

This treadmill is designed in a way that in the event of an electrical fault, the machine
will turn off automatically to prevent any injuries to the user and to prevent damage to
the machine (i.e. motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power
switch off, waiting for 1 minute then turning the power button back on.
If, after you have reset the treadmill, it is still not running correctly, please run the
self-checking analyse to distinguish what type of error problem the machine is
encountering.

5.1 Troubleshooting Table

Before attempting any work on the treadmill, ensure that the power is off
and the plug is removed from the power point.
Do not use extension leads as it may lead to power decrease and failure.
PROBLEM
1. Treadmill will not start.
2. Running belt slips.
3. Running belt speed is not
in the center.
4. Running belt speed
seems slower than displayed
speed.
5. Treadmill squeaks when
walked on.
5 TROUBLE SHOOTING
CAUSE
1. Not plugged in.
2. Safety key not inserted
3. Treadmill circuit breaker
tripped.
4. House circuit breaker
tripped.
1. Running belt not tight,
1. Running belt tension not
centered across the rear
roller.
1. Set in kilometres.
2. Out of calibration.
1. Pivot points need
lubrication.
LIFESPAN EQUALIZER
CORRECTION
1. Plug into three prong grounded
outlet.
2. Insert safety key.
3. Reset circuit breaker (see
exploded view for location)
4. Reset circuit breaker.
1. Adjust walking belt tension.( see
Maintenance Instructions)
2. Center walking belt.(See
Maintenance Instructions)
1. Change to miles per hour.
2. Recalibrate electronics
(professional operation only)
1. Lubricate pivot points.
Page 20