Audio Control - Danish Interpretation Systems DCS 6000 User Manual

DIS
10.2.2.11 Microphone status complete
Informs, that complete system status has been sent.
mic_status_done<CR>
10.2.2.12 Seat state
Seat state information.
seat_state <seat number> <seat state><CR>
This information is sent from the CU to an External Control, when the state of a seat changes – a seat becomes
passive or active.
<seat number> The seat number identification of a Conference unit. An integer ranging from 1 to 65535.
<seat state> The current state of the seat. This can be "active" or "passive"
10.2.2.13 Command error
The CU has received an unknown command.
command_error <error text><CR>
<error text> is a text explaining the fault case.
Examples:
command_error unknown command<CR>
command_error syntax error<CR>
10.3

Audio Control

10.3.1 Commands from External Control to CU 6105
10.3.1.1 Set loudspeaker volume
Set the volume of loudspeakers for all Conference units.
loudspeaker_volume <volume><CR>
<volume> The volume of the loudspeakers ranging from -41 to 0. The value -41 indicates Off, whereas values from -
40 to 0 indicates attenuation in dB.
The CU responds to this command by returning a 'loudspeaker_volume' command.
10.3.1.2 Set line input 1 level
Adjust the level of line input signal.
line_input_level_1 <level><CR>
62
User Manual CU 6105.docx
User Manual