Connection Details; User Manual Cu 6105.Docx - Danish Interpretation Systems DCS 6000 User Manual

DIS
Max. number of Conference units ............................................. 500
System performance
Max. number of interpreter units .............................................. 150
Max. number of languages ............................................................... 16
Max number of open microphones ................................................. 8
• CU Power Supply incl. mains cable
Accessories supplied
• Terminal block for EEM connector
• 19" brackets for installing in 19" standard racks
• USB memory stick with 'User Manual'
Delivered power ............................................................... max. 150W
CU Power Supply
9.3

Connection Details

Blue
Mains
Brown
Green/Yellow Earth (Ground)
The DCS 6000 system uses Cat5e, Cat6 or Cat7 F/UTP
DCS-LAN Chain
or U/FTP cables with screened RJ45 connectors.
EIA 568-B wiring shall be used.
Important: The names of Cat5/6/7 cable type have
changed.
Old name
FTP
STP
UTP
Important: Use only F/UTP or U/FTP (screened) cables
and screened RJ45 connectors and not U/UTP cable, which
are unscreened.
How to wire a Cat5e (EIA 568-B) cable to a RJ45 con.:
Pin Function
1 In-going + ORG/WHT
2 In-going - ORG
3 +48V GRN/WHT
4 0V BLU
Neutral
Live
New name
F/UTP
U/FTP
U/UTP
Connector #1 Connector #2
ORG/WHT
ORG
GRN/WHT
BLU

User Manual CU 6105.docx

Input current ........... max. 4A@115V AC or max. 2A@230V AC
In-rush current ............... max. 40A@115V or max. 20A@230V
Standby consumption ................................................................ <0,5W
Mains voltage .................................................. 100 - 240V, 50 - 60Hz
Supply voltage for CU 6105 .................................................. 48V/3A
Efficiency typical.................................................................87%
Weight ................................................................................................ 935 g
Dimensions (W x H x D) .....................................180 x 52 x 99 mm
Approvals .......................................................... CE, KC, CCC, UL, TÜV
Specifications are subject to change without notice.
5 0V BLU/WHT
6 +48V GRN
7 Outgoing - BRN/WHT
8 Outgoing + BRN
Important: If other color codes are used then the four pairs
are connected as follows:
Pair 2: Pin 1 & 2
Pair 3: Pin 3 & 6
Pair 1: Pin 4 & 5
Pair 4: Pin 7 & 8
The phase of the pairs must be correct and the wiring
spec. as stated in Cat5e (EIA 568-B) have to be
followed.
Note: Cat6 and Cat7 cables can normally only be terminated
in sockets (female) and not in cable plugs.
Cat6 and Cat7 can thus only be used for feeding cables
terminating in wall outlets or patch panels.
Analog Audio Out
XLR3 male
Pin Signal
1 Earth
2 Signal +
3 Signal –
User Manual
BLU/WHT
GRN
BRN/WHT
BRN
Cable type
2 x 0.25 mm2 shielded.
53