DIS
6.3
Connecting Units
This chapter gives an overview of typical system
connections using the CU 6105 Central Unit:
Although the schematics are typical and are intended
to give a general overview, combinations of the
6.3.1
Connecting Conference Unit
The DCS 6000 Conference Units are connected to the
CU 6105 using EC 6001-xx Cat5e cables. This is the
basic connection of the system.
Both of the DCS-LAN chain connectors on the CU
6105 can be used for connecting any Conference Unit
or other units.
When using JB 6104 Junction boxes, the conference
Figure 6.3-A
Connecting DCS 6000 conference units.
units can be connected and disconnected without
interrupting the conference.
Figure 6.3-B
Connecting DCS 6000 conference units using JB 6104 Junction Boxes.
6.3.2
Connecting a PC
18
schematics are however not only possible, but very
common used.
Please refer to section '5.3.1 Connection using only one
DCS-LAN ' for information about the number of units
which can be connected using one chain.
Refer to section '5.3.2 Connection using both DCS-LAN
chains simultaneously' when using two chains.
Please refer to the 'User Manual JB 6104' for further
details.
User Manual CU 6105.docx
User Manual