10.2.2 Commands From Cu 6105 To External Control - Danish Interpretation Systems DCS 6000 User Manual

DIS
mic_request_on (for all microphones in request list)
mic_on
mic_status_done
10.2.1.14 Help
help<CR>
Help information is available listing all commands supported by the CU. If a command is included in the help
help <command><CR>
command, details on that command is returned.
Note: The help command results in a number of command lines returned from the CU. The command is intended for use in a
simple console.

10.2.2 Commands from CU 6105 to External Control

10.2.2.1 Microphone on
A microphone is turned on.
mic_on <seat no><CR>
10.2.2.2 Microphone off
A microphone is turned off.
mic_off <seat no><CR>
10.2.2.3 Microphone in request list
A microphone is inserted into request list.
mic_request_on <seat no> <request position><CR>
<request position> informs about the position in the request list.
10.2.2.4 Microphone out of request list
A microphone is removed from request list.
mic_request_off <seat no><CR>
10.2.2.5 Max total speakers
Maximum number of speakers allowed to speak.
max_total_speakers <max total speakers><CR>
<max total speakers> "1" to "8"
60
(for all microphones on)
User Manual CU 6105.docx
User Manual