Table of Contents
Advertisement
4. Select Internet Protocol (TCP/IP) and select Properties being careful not to
uncheck the check box. See Figure 38.
5. In the General tab, select
appropriate IP address from the range of available IP address and the
appropriate Subnet Mask for your network in the fields provided. Enter the
IP address of the DW6000 for the Default Gateway. Enter 198.77.116.8 for
the Preferred DNS server field. See Figure 39.
6. Select OK to close the open dialog boxes and finish the configuration.
7. Restart the computer even if Windows does not require you to do so. This
will ensure that the network settings are automatically reset.
Use the following IP address
Figure 38: TCP/IP Properties
Figure 39:
Typical operating system settings
. Enter an
49
Advertisement
Table of Contents
