Table of Contents
Advertisement
SMS
The SMS pages are used to perform basic messaging functions such as sending a message, receiving a message and redirecting
an incoming message to another destination.
Basic functionality supported:
1.
Ability to send a text message via a 3G network and store in permanent storage.
2.
Ability to receive a text message via a 3G network and store in permanent storage.
3.
Ability to forward incoming text messages via a 3G network to another remote destination which may be a TCP/UDP
server or other mobile devices.
Setup
General SMS functionality is enabled by default. You can open the Setup page in order to configure additional settings. To do this,
click on "SMS" and then "Setup".
The router can store up to 30 messages in memory and displays the total number of messages stored under the "Memory &
Message Status" section. It also displays the number of messages in the Inbox and Outbox.
OPTION
SMS Enable/Disable
Messages / Page
Encoding Scheme
Redirect to Mobile
Redirect to TCP
TCP Port to Redirect
Redirect to UDP
UDP Port to Redirect
www.netcommwireless.com
Figure 48 – Advanced View – SMS Setup
Use this option to enable or disable the SMS functionality of the router.
Enter the number of SMS messages to display per page.
The encoding method used for SMS messages.
Forward incoming text messages to the remote destination defined.
Forward incoming text messages to the remote TCP destination defined.
The TCP port on which to connect to the remote destination on.
Forward incoming text messages to the remote UDP destination defined.
The UDP port on which to connect to the remote destination.
Table 31 - Advanced View - SMS Setup Configuration items
DEFINITION
NetComm Wireless 3G27WV-02 User Guide
54
Advertisement
Table of Contents
