Overview
Introduction
This document provides you all the information you need to set up, configure and use the NTC-40 Series router. .
Target Users
This document is intended for system integrators or experienced hardware installers who understand telecommunications
terminology and concepts.
Prerequisites
Before continuing with the installation of your NTC-40, please confirm that you comply with the minimum system requirements
below.
An activated 3G SIM card.
Device with a working Ethernet or wireless (802.11b/g/n) network adapter.
A Web Browser such as Internet Explorer, Netscape Navigator, Mozilla Firefox, Opera, Safari etc.
Telephony Requirements
Standard analogue PSTN or cordless PSTN phone handset (DECT) with an RJ-11 port.
(ISDN phone handsets are not supported)
RJ-11 cable
Notation
The following symbols are utilised in this installation manual:
-
The following note requires attention
-
The following note provides a warning
-
The following note provides relevant information
NTC-40 –HSPA+ M2M WiFi Router with Voice
4
NTC-40 Series – HSPA+ M2M WiFi Router
www.netcommwireless .com
YML40V