Network Setting; Customizing Rings And Volume - Escene SayHi WS620 User Manual

Network Setting

If you want to...
network setting --1) Choose " System settings" > " Advanced settings" £»
--2) Enter the password required£¨ The default is empty) £»
--3) Choose " Network" , you can configure the following parameters:

Customizing Rings and Volume

If you want to...
Change the ring --1) Choose " System settings" > " Phone settings" > " Ring type" £»
tone --2) Press navigation to choose ring tone£»
--3£© Press
it.
Escene Communication
-Type: static IP or DHCP or PPPOE
-IP: enter IP address £¬ Note: Do not duplicate the ip address with
other devices on the network
-Mask: enter appropriate sub mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
softkey to choose a ring tone to play a sample of
Then...
This...
WS620 IPPhone
www.escene.hk