Table of Contents
Advertisement
Another call is active
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing
• If you make a mistake while dialing, press C button to erase digits.
Answering a call
You can answer a call by simply lifting the handset£¬ or you can use other options if they are
available on SayHi WS620:
If you want to...
--1) Your phone ring;
Answer
with
a
--2) Line button of the ringing
handset
Answer with the
speakerphone
--3) Status of the line on the
(Non-headset
mode)
Answer with the a
headset
Switch
from
a
--1) Another Line button is Red
connected Call to
answer a ringing
--2) Press the flashing
call
Auto-answer
--1) Press MENU or OK button > " Function setting" > " Auto answer " ;
--2) Select " Enable " ;
--3) Your phone answers incoming calls automatically after a few rings
Escene Communication
--2) Enter a number;
--3) Press ' #' button (default) ;
-or press
line is Red
and
flashing, Light strip is
Red
and flashing;
phone is
.
Red
and flashing;
original call will be hold.)
to send the number.
, Headset or Speaker button.
Then...
--Pick up the handset
--Press Speaker button
-or press the Line button flashing
Red
,
-or press
--Put on headset, press Headset button
so that the status light is Red
and then do as using speakerphone
and flashing, Light strip is
Line button to answer (at this time, the
WS620 IPPhone
,
.
www.escene.hk
Advertisement
Table of Contents
