Network Setting - Escene SayHi 320 Series User Manual

Disable sip account

6.2 Network Setting

If you want to ...
network setting
Escene Communication
--5) Set up the above parameters, select "Submit changes" to saves
settings, Complete the account creation.
* Note: the parameters with the * mark must be set.
--1) Select "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Select "SIP" > "Account sip"；
--4) Select "Enable account" > "Disable"；
--5) Select "Submit changes" to saves settings
--1) Choose "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Choose "Network", you can configure the following parameters:
-Type: static IP or DHCP
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate subnet mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
Then...
www.escene.cn/en/