Network Setting - Escene 620 Series User Manual

Disable sip account

Network Setting

If you want to...
--1) Choose "System settings" > "Advanced settings"；
network setting
--2) Enter the password required（The default is empty) ；
--3) Choose "Network">"LAN Settings", you can configure the following
Escene Communication Co.,Ltd
--1) Choose "System setting" > "Advanced settings"；
--2) Enter the password required（The default is empty) ；
--3) Choose "SIP" > "Account sip"；
--4) Choose "Enable account" > "Disable"；
--5）Press Save soft key
parameters:
-Type: static IP or DHCP or PPPOE
-IP: enter IP address ，Note: Do not duplicate the ip address with
other devices on the network
-Mask: enter appropriate sub mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
620 Series IPPhone
Then...
www.escene.cn/en/