Network Setting - Escene SayHi 410 Series User Manual

Disable sip account

Network Setting

If you want to...
network setting --1) Choose "System setting" > "Advanced setting"；
--2) Enter the password required（The default is 159357) ；
--3) Choose "Network", you can configure the following parameters:
Escene Communication
-User Name*: the account matched with the SIP server.
（extension number） ，
-Authen usr: the Authenticated users matched with the SIP
server.（The default With the same account）
-user pwd*: the user password matched with the SIP server
-Description: description of this account，
-SIP1*: the primary SIP server，By default all calls through the
server，
-SIP2: the secondary SIP ， When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value
is 20 The default value is 3600.
--5 ） Set up the above parameters ， Press Save soft key to saves
settings，Complete the account creation；
* Note: the parameters with the * mark must be set.
--1) Choose "System setting" > "Advanced setting"；
--2) Enter the password required（The default is 159357) ；
--3) Choose "SIP" > "Account sip"；
--4) Choose "Enable account" > "Disable"；
--5）Press Save soft key
-Type: static IP or DHCP
-IP: enter IP address ， Note: Do not duplicate the ip address with
410 Series IPPhone
Then...
www.escene.cn/en/