Network Setting - Escene 102 Series User Manual

Disable sip account

Network Setting

If you want to ...
network setting --1) Select "Settings" > "Advanced settings"
--2) Enter the password required
--3) Select "Network", you can configure the following parameters:
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
example change it to 2003), you must use IP and Telnet port to login the
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
server,
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
The default value is 3600.
20
-Con type: which protocol the phone used to send the
voip packets
-Amount of used lines: Maximum line are allowed to
used
--5) Set up the above parameters, select "Submit changes" to saves
settings, Complete the account creation.
--1) Select "Settings" > "Advanced setting"
--2) Enter the password required
--3) Select "SIP" > "Account sip"
--4) Select "Enable account" > "Disable"
--5) Select "Submit changes" to saves settings
、
-Type: static IP DHCP
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
-Telnet port: the default Telnet port is 23, if you change it (for
102 Series IPPhone
；
（
T he default is empty)
；
；
Then...
；
（ T he default is empty) ；
、
P POE
www.escene.cn/en
；