Network Setting - Escene ES/DS/410 User Manual

Disable sip account
Network Network

Network Setting

Network Setting Setting Setting
I I I I f f f f you you you want want want to to to to... ... ... ...
you want
network setting --1) Choose "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Choose "Network", you can configure the following parameters:
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
-User User User User Name* Name* Name* Name*: the account matched with the SIP server.
（extension number） ，
-Authen Authen Authen usr Authen usr usr usr: the Authenticated users matched with the SIP
server.（The default With the same account）
-user user user pwd* pwd*: the user password matched with the SIP server pwd*
user pwd*
-Description Description Description Description: description of this account，
-SIP1* SIP1*: the primary SIP server，By default all calls through the SIP1* SIP1*
server，
SIP2: the secondary SIP ， When the primary server is
-SIP2 SIP2 SIP2
unavailable ,use the SIP server
Refresh Refresh time time
-Refresh Refresh time time: Registration refresh interval, the minimum value
is 20 The default value is 3600.
--5）Set up the above parameters，Press
settings，Complete the account creation；
Note Note
* Note Note: the parameters with the * mark must be set.
--1) Choose "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Choose "SIP" > "Account sip"；
--4) Choose "Enable account" > "Disable"；
--5）Press soft key
Type
-Type Type Type: static IP or DHCP
ES/DS410 IPPhone
softkey to saves
T T T T hen hen hen... ... ... ... hen
www.escene.hk/en