Escene SayHi WS620 User Manual page 25

Disable sip account
Escene Communication
the following parameters
-Enable account: choose Enable
-Account Mode: you can choose VOIP,
-Display Name: The name displayed on the screen
-User Name: the account matched with the SIP server.
£¨ extension number£ © £ ¬
-Authen usr: the Authenticated users matched with the SIP
server.£¨ The default With the same account£©
-user pwd: the user password matched with the SIP server
-Description: description of this account£¬
-SIP1: the primary SIP server£¬ By default all calls through the
server£¬
-SIP2: the secondary SIP £¬ When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value
The default value is 3600.
is 20
-Con type : the protocol use to communicate with SIP server.
-Amount of used lines: the lines the extension used,can use
1-8,default is 2.
--5£© Set up the above parameters£¬ Press
settings£¬ Complete the account creation£»
* Note: the parameters with the * mark must be set.
--1) Choose " System setting" > " Advanced setting" £»
--2) Enter the password required£¨ The default is empty) £»
--3) Choose " SIP" > " Account sip" £»
--4) Choose " Enable account" > " Disable " £»
--5£© Press soft key
WS620 IPPhone
softkey to saves
www.escene.hk