Network Setting - Escene SayHi ES620 User Manual

Disable sip account

Network Setting

If you want to...
--1) Choose "System setting" > "Advanced setting"；
network setting
--2) Enter the password required（The default is empty) ；
--3) Choose "Network", you can configure the following parameters:
Escene Communication
-User Name*: the account matched with the SIP server.
（extension number） ，
-Authen usr: the Authenticated users matched with the SIP
server.（The default With the same account）
-user pwd*: the user password matched with the SIP server
-Description: description of this account，
-SIP1*: the primary SIP server，By default all calls through the
server，
-SIP2: the secondary SIP ， When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value
The default value is 3600.
is 20
--5）Set up the above parameters，Press
settings，Complete the account creation；
* Note: the parameters with the * mark must be set.
--1) Choose "System setting" > "Advanced setting"；
--2) Enter the password required（The default is empty) ；
--3) Choose "SIP" > "Account sip"；
--4) Choose "Enable account" > "Disable"；
--5）Press
-Type: static IP or DHCP
soft key
Then...
ES620 IPPhone
softkey to saves
www.escene.hk