Network Setting - Escene SayHi ES330 User Manual

All manuals and user guides at all-guides.com
Generated by Unregistered Batch DOC TO PDF Converter 2010.2.301.1358, please register!
--1) Choose " System setting" > " Advanced setting" ；
Create an SIP account
--2) Enter the password required（The default is empty) ；
--3) Choose " SIP" > " Account sip" ；
--4) Choose one of the account you want to setting, you can configure
20
--5) Set up the above parameters, Press
* Note: the parameters with the * mark must be set.
--1) Choose " System setting" > " Advanced setting" ；
Disable sip account
--2) Enter the password required（The default is empty) ；
--3) Choose " SIP" > " Account sip" ；
--4) Choose " Enable account" > " Disable " ；
--5) Press

Network Setting

Escene Communication
24
the following parameters
-Enable account*: choose Enable
-Display Name: The name displayed on the screen
-User Name*: the account matched with the SIP server.（extension
number) ,
-Authen usr: the Authenticated users matched with the SIP server.
（The default With the same account)
-user pwd* : the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the
server,
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
The default value is 3600.
settings, Complete the account creation；
soft key
softkey to saves
www.escene.hk 24