Table of Contents
Advertisement
2. Connecting Your Phone
Your system administrator will likely connect your new SayHi WS620 IP Phone to the corporate
IP telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the box WS620 IP Phone; carefully check the packing list, Packing List as follows:
Item
IP Phone
Handset
Handset Cord
Power adapter
RJ45 cable
CD
Quick Reference
Product certification
2) As shown in figure 2.1 and figure 2.2, Please plug Handset Cord into RJ11 interface(IP
Phone and Handset), RJ45 cable into the LAN interface£» IP Phone will automatically start if IP
Phone with POE function.
3) The phone must work together with power adapter without POE support.
4) Connect your computer to PC interface of the phone with cable.
* More detailed description please refers to the 3.Phone overview-Understanding phone
buttons and hardware.
Figure 2.1 Interfaces of SayHi WS620
Escene Communication
Counts
1
1
1
1
1
1
1
1
WS620 IPPhone
www.escene.hk
Advertisement
Table of Contents
