Network Setting - Escene Sayhi ES620 User Manual

20
Disable sip account

Network Setting

If you want
to ...
--1) Select "System setting" > "Advanced setting"；
network setting
--2) Enter the password required（The default is 159357) ；
--3) Select "Network", you can configure the following parameters:
Escene Communication
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum
value is 20
The default value is 3600.
--5) Set up the above parameters, select "Submit changes" to
saves settings, Complete the account creation.
* Note: the parameters with the * mark must be set.
--1) Select "System setting" > "Advanced setting"；
--2) Enter the password required（The default is 159357) ；
--3) Select "SIP" > "Account sip"；
--4) Select "Enable account" > "Disable"；
--5) Select "Submit changes" to saves settings
-Type: static IP or DHCP, PPPoE.
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for
example change it to 88),you must use IP and Web port to login
the web page (for example http://192.168.0.200:88).It will take
effect on next reboot.
-Telnet port: the default Telnet port is 23, if you change it (for
example change it to 2003), you must use IP and Telnet port to
login the manage page (for example telnet 192.168.0.200:2003).It
will take effect on next reboot.
220 Series IP Phone
Then...
www.escene.cn/en/