Keypad Instruction; Sip Account Settings; Network Setting - Escene ES330-PEG User Manual

6.Keypad Instruction

SayHi series IP phones are can be configured in two ways. The first you can use the phone keypad where you can settings for you IP
phones, the other you can log in to User Options web pages where you can settings for you IP phones.
Use phone keypad to set. Press MENU or OK button to the main menu, Use the navigation keys to select menu, press OK button to
confirm menu selections, press

6.1 SIP Account Settings

ES330-PEG IP PHONE make calls based on sip accounts, ES330-PEG IP phones can support 2 or 3 independent SIP account, each
account can be configured to different SIP server.
If you want to...
Create a SIP account
Disable sip account

6.2 Network Setting

If you want to ...
Then...
1) Choose "System setting" > "Advanced setting".
network setting
2) Enter the password required（The default is empty).
3) Choose "Network", you can configure the following parameters:
www.nolto.com
to delete input information.
Then...
1) Select "System setting" > "Advanced setting".
2) Enter the password required（The default is empty).
3) Select "SIP" > "Account sip".
4) Select one of the accounts you want to set, you can configure the following
parameters
-Enable account*: Select Enable
-Display Name: The name displayed on the screen
-User Name*: the account matched with the SIP server. （extension number) ,
-Authen usr: The Authenticated users matched with the SIP server. （The default
With the same account)
-user pwd*: the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, by default all calls through the server,
-SIP2: the secondary SIP, When the primary server is unavailable, use the SIP
server
-Refresh time: Registration refresh interval, the minimum value is 20
value is 3600.
5) Set up the above parameters, select "Submit changes" to saves settings, Complete
the account creation.
* Note: the parameters with the * mark must be set.
1) Select "System setting" > "Advanced setting".
2) Enter the password required（The default is empty).
3) Select "SIP" > "Account sip".
4) Select "Enable account" > "Disable".
5) Select "Submit changes" to saves settings
-Type: static IP or DHCP
-IP: enter IP address, note: Do not duplicate the IP address with other devices on
the network
The default
Escene Communication
19