Navigate Through The Menu - Danish Interpretation Systems DCS 6000 User Manual

DIS
Operating the menu is always a sequence of
4.4.2

Navigate through the menu

alternating turns and pushes:
Turn the button to:
Cycle through the menu items within a menu
(the menu item number and title on the first

line is blinking).
Go to a settable option within a menu item (a
blinking cursor moves through the menu

screen).
Cycle through the available values for a
settable option (the value is blinking).

Push the button to:
Confirm a chosen menu item (the menu item
number and title stops blinking, a blinking

cursor appears).
Go to a sub-menu (the sub-menu item
character starts blinking).

Confirm the selection of a settable option
(the cursor disappears, the option value

starts blinking).
Confirm a selected value for a settable option
(the value stops blinking, the cursor appears

again).
After 3 minutes of inactivity, the display
automatically switches back to the first item of
the Main menu (Transmitter Status).
Each menu item is identified by a number (for
the Main menu) or by a number plus a character
(for the sub-menus). The item identification can
be found at the start of the first line and is used
to navigate to and from sub-menus.
Most menu items have one or more settable
configuration options. The value of an option can
be changed by selecting a value from a list of
available values.
26
User Manual DCS 6000 Digital IR System rev H.docx
Turn the button to move through the Main menu
To navigate through the Main menu:
items. The item number and title starts blinking.
(The first item, Transmitter Status, doesn't
blink.)
1. Navigate in the Main menu to an item with
To jump to a sub-menu:
three dots (e.g. 'Setup ...').
2. Push the button to go to the sub menu. The
submenu item character and title starts
blinking.
Note: To enter the Setup sub-menu, push and hold the
button for at least 3 seconds.
1. Turn the button to move the cursor to the
To navigate through a sub-menu:
submenu item character.
2. Push the button. The item character and title
starts blinking.
3. Turn to select another sub-menu item
character.
4. Push to confirm the selection.
1. Navigate to the applicable menu item.
To change option values:
2. Turn the button to move the cursor to the
option value you want to change.
3. Push the button to activate the option. The
option value starts to blink.
4. Turn the button to select a new option value.
5. Push the button to confirm the new value.
The option value stops blinking.
6. Turn the button to move the cursor to
another settable option (when available) and
repeat steps 3 to 5.
User Manual