Set Channel Names; Disable Or Enable Carriers - Danish Interpretation Systems DCS 6000 User Manual

DIS
Each channel can be assigned a name via the
4.5.10

Set channel names

Channel Names menu (4E). This can be 'Floor' or
one of 30 pre-defined ISO language names. Also
up to 32 user-defined names can be added.
The language in which the pre-defined names
are presented can be chosen via the Language
List menu option (4D).
4 Setup/4D Language List
4D Language List
English
Options English Description Present language list in English.
French Present language list in French.
Original Present each language name in it's
original language (e.g. English,
Français, Deutsch, etc.).
4 Setup/4E Ch. Names
4E Channel 01
English
4E Channel nn Options Description Select which channel to name.
Channel nr. "nn":
'Floor' Use this name for the channel that
carries the 'Floor' language.
ISO language Choose from pre-programmed ISO
names language names.
User defined Up to 32 userdefined names (max. 12
names characters) can be added and chosen.
Normally the channels
4.5.11

Disable or enable carriers

assigned to the available carriers. However,
when the reception quality of a specific carrier is
not good, that carrier can be disabled manually.
36
{00 ... 31}
are automatically
User Manual DCS 6000 Digital IR System rev H.docx
The channels are then automatically re-assigned
to the next available carriers.
Each of the 8 carriers (0 to 7) can be disabled or
enabled in the Carrier Settings menu (4F).
4 Setup/4F C. Settings
4F Carrier 0
Enabled
4F Carrier n Select which carrier to configure.
Options Description
Carrier nr. "n":
Disabled The selected carrier is disabled (off).
Enabled The selected carrier is enabled (on).
User Manual
{0 ... 8}