Enable / Disable Ir-Monitoring; Enable/Disable Headphone Output; Choose Transmitter Name; Reset All Options To Factory Default Values - Danish Interpretation Systems DCS 6000 User Manual

DIS
The mini IR-radiator at the front of the
4.5.15

Enable / disable IR-monitoring

transmitter can be used for monitoring the IR-
signal.
When required (e.g. for security reasons) this
option can be switched off (menu 4L).
4 Setup/4L Mini Radiator
4L Mini Radiator
Enabled
Enabled Options Description Enable or disable the mini IR-radiator
Disabled at the front of the transmitter.
4.5.16 Enable/disable headphone
The headphone output at the front of the
output
transmitter can be used for monitoring the
input-and channel signals.
When required (e.g. for security reasons) this
option can be switched off in menu item 4M.
4 Setup/4M Headphone
4m Headphone
Enabled
Options Enabled Description Enable or disable the headphone
Disabled output at the front of the transmitter.
The transmitter can be assigned a user-defined
4.5.17

Choose transmitter name

name. This name is used in the Transmitter
User Manual DCS 6000 Digital IR System rev H.docx
Status screen. The name can be edited in the Unit
Name menu (4N).
4 Setup/4N Unit Name
4M Headphone
DT 6008
Free Text Options Assign a user defined name to the Description
transmitter (max. 16 characters). The
default name is 'DT 6008' or 'DT
6032' depending of the model.
4.5.18 Reset all options to factory
Use menu item 4O to reset all options to the
default values
factory defaults. The user defined transmitters
name, the user defined language names and the
transmission mode are not reset. (The default
values are indicated by an asterisk (*) in the
menu descriptions.)
4 Setup/4O Defaults
4O Reset to
defaults? No
No Cancel Reset.
Options Description
Yes Reset all options to the factory default
value.
The user defined transmitters name,
the user defined language names and
the transmission mode are not reset.
User Manual
39