Dt 6008 & Dt 6032 Transmitters; Description - Danish Interpretation Systems DCS 6000 User Manual

Digital conference system digital infrared wireless audio distribution system
Hide thumbs Also See for DCS 6000:
Table of Contents

Advertisement

DIS
4 DT 6008 & DT 6032 Transmitters
The transmitter is the central element of the DCS
4.1

Description

6000 Digital IR system. It accepts asymmetrical
audio sources from a maximum of 32 external
channels (dependent on the transmitter type)
and can be used with the DCS 6000 Digital
Conference System. It can also be used with
analogue discussion and interpretation systems
(e.g. CIE 9000), or as a stand-alone system
distributing external audio sources.
The transmitter is suitable for either table-top or
19-inch rack-mounted use. Four feet (for table
top use) and two mounting brackets (for rack
mounting) are supplied.
1. Mains on/off switch – After switching the
Figure 4.1-A
Front view of DT 6008 and DT 6032 Transmitter
mains on, the transmitter starts up and the
display (3) will light-up.
2. Mini IR-radiator – Four IREDs, transmitting
the same infra-red signal as the radiator
output. This can be used for monitoring
purposes. They can be disabled via the
configuration menu.
3. Menu display – A 2x16 character LCD-
display
gives
transmitter status. It is also used as a an
interactive display for configuring the
system.
4. Menu button – A turn-and-push button to
operate
the
configuration
combination with the display (3).
22
information
about
software
User Manual DCS 6000 Digital IR System rev H.docx
5. Monitoring headphone output – A 3.5 mm
(0.14 inch) jack socket to connect a
headphone for monitoring purposes. It can
be disabled via the configuration menu.
Note: The mini IR-radiator and the headphone output
can also be permanently disabled by removing two
resistors
Figure 4.1-B
1. Mains input – Euro mains socket. The
Figure 4.1-C
transmitter has automatic mains voltage
selection. A mains cable is provided.
2. Emergency switch connector – A
terminal block socket for a single,
the
'normally open' switch. When the switch
is closed, the audio signal on the Aux
right input is distributed on all output
channels, overriding all other audio
inputs.
in
Back view of DT 6008 Transmitter
Back view of DT 6032 Transmitter
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt 6008Dt 6032Ra 6013Ra 6025Dr 6004Dr 6008 ... Show all

Table of Contents