Troubleshooting - Danish Interpretation Systems DCS 6000 User Manual

DIS
.

8 Troubleshooting

In this chapter a simple fault-finding guide is
given.
This is intended to be used to remedy the
consequences of incorrect installation. If more
Transmitter display does not light
up:
Transmitter indicates "no
radiators":
Transmitter indicates "radiator
fault":
Emergency contact does not work:
Red LED flashes and amber LED is
on of one or both IRED panels of a
radiator:
Both red LED and amber LED are
on of one or both IRED panels of a
radiator:
Infra-red receiver fails to function
properly:
50
Check that the mains supply to the transmitter is connected
and that the transmitter is switched on.

Ensure that connections to all radiators have been made
correctly and that each radiator's mains supply is connected

and switched on.
Ensure that connections to all radiators have been made
correctly and that each radiator's mains supply is connected

and switched on.
Examine the radiator LEDs.
Check that the emergency contact is connected correctly.

Check that the audio is connected according to the selected

auxiliary input mode (menu 4H).

IRED panel is in temperature protection mode. Check that
the natural airflow around that radiator is not obstructed. If

not so, replace the radiator.
IRED panel malfunctions and the radiator should be
replaced.

If disposable batteries are used, check whether the batteries
have sufficient capacity and whether they are inserted with

the correct polarity.
If a battery pack is used, ensure that the battery pack is fully
charged.

Ensure that the headphone is connected properly.
Switch the receiver on and check whether the display

indicates a channel.

Ensure that the receiver picks up sufficient IR signal and
check whether the antenna symbol becomes visible.

User Manual DCS 6000 Digital IR System rev H.docx
serious faults or problems arise the installer
should contact a qualified technician.
User Manual