DIS
Figure 3.2-B
Overview of the signal processing (for one carrier)
The DCS 6000 Digital IR system can transmit up
3.2.4
Carriers and channels
to 8 different carrier signals (depending on the
transmitter type). Each carrier can contain up to
4 different audio channels.
The maximum number of channels per carrier is
dependent on the selected quality modes. Stereo
signals use twice as much bandwidth as a mono
signal, premium quality uses twice as much
bandwidth as standard quality. Per carrier a mix
of channels with different quality modes is
possible, as long as the total available bandwidth
is not exceeded.
The table below lists all possible channel
combinations per carrier:
Mono
Conference
4
2
Possible
2
number of
channels
per carrier
Figure 3.2-D
Possible channel combinations per carrier
8
Channel Quality
Mono
Stereo
Hi-Fi
Conference
1
1
1
1
2
2
User Manual DCS 6000 Digital IR System rev H.docx
Figure 3.2-C
Directional characteristics of the receivers
Stereo
Bandwidth
4 x 10 kHz
Hi-Fi
2 x 10 kHz and 1 x 20 kHz
2 x 10 kHz and 1 x 10 kHz (left) and 1 x 10 kHz (right)
1 x 20 kHz and 1 x 10 kHz (left) and 1 x 10 kHz (right)
2 x 10 kHz (left) and 2 x 10 kHz (right)
2 x 20 kHz
1
1 x 20 kHz (left) and 1 x 20 kHz (right)
User Manual