View Carrier Assignments; Configure Auxiliary Inputs - Danish Interpretation Systems DCS 6000 User Manual

DIS
With menu option 4H the carrier assignment can
4.5.12

View carrier assignments

be seen, i.e. which channels are transmitted on
each carrier.
Note that the number of channels that can be
distributed on one carrier depends on the
chosen quality mode.
4 Setup/4G C. Overview
4G Carrier 0
Ch. 00 01 02 03
Options 4H Carrier n Description Select which carrier to view.
Carrier nr. "n":
Ch nn nn nn nn Shows the channel numbers that are
assigned to the selected carrier. The
symbol '- -' is used when less than 4
channels are assigned.
Channel nr. "nn":
If the channel number is represented
one time Mono SQ is assigned to this
carrier.
If the channel number is represented
two times Mono PQ or Stereo SQ is
assigned to this carrier.
If the channel number is represented
four times Stereo PQ is assigned to
this carrier.
The way the signals on the auxiliary inputs (Aux-
4.5.13

Configure auxiliary inputs

.L and Aux.-R) are handled can be set in the Aux.
Input Mode menu (4H).
When the option 'Stereo' is chosen, the signals
on both Aux. inputs are distributed as a stereo
signal to all channels. This setting can for
instance be used to transmit a music signal
during breaks in a conference.
{0 ... 8}
{00 ... 31}
User Manual DCS 6000 Digital IR System rev H.docx
Note that the Transmission mode must be set to
'Aux to All' (menu item 4A) to actually transmit
this stereo signal.
The 'Stereo to Mono' and 'Mono+ Emergency'
options can be selected when the transmitter is
used in combination with an interpretation
system.
The Aux. input(s) will be distributed to the
Symmetrical Audio Input.
4 Setup/4H Aux. Input
4H Aux. Input
Stereo
Stereo The Aux. inputs will be distributed in
Options Description
stereo to all channels when the
transmission mode (menu item 1) is
set to 'Aux to All'.
Stereo to Mono The Aux-L and Aux-R inputs are
combined into a mono signal and
distributed to the Symmetrical Audio
Input.
Mono + Emergency The Aux-L input is distributed to the
Symmetrical Audio Input and
Interpreters Module (when present).
The Aux-R input is distributed as
emergency signal to all channels
when the emergency switch is closed.
User Manual
37