Using Ao 6008 With Dt 60Xx Digital Ir-Transmitter - Danish Interpretation Systems DCS 600 User Manual

Danish Interpretation Systems

Using AO 6008 with DT 60xx Digital IR-Transmitter

When using the AO 6008 with the DT 60xx
Infrared Transmitter, the audio output level on the
AO 6008 has to be set to match the sensitivity on
the transmitter.
The correct level to be set on each connected
channel on the AO 6008 is +3dB. This level is
factory preset, but can as earlier mentioned be
changed using SW 6000. The DT-60XX input level
settings should be set to –6dB.
.
Manual 01 18 04440
User Manual
15