Configuring Via The Setup Mode Window; Using A Telnet Connection - Lantronix SecureBox SDS2100 User Manual

SDS2100 User Guide
Figure 3-4. Server Properties Configuration on the Web Browser
3. In the Telnet Password field, enter a password to prevent unauthorized access
to the Setup Mode via a Telnet connection to port 9999. The password is limited
to 4 characters. (An enhanced password setting of 16 characters is available
under Security Settings on the Telnet Setup Mode window.)
Note:
serial connection.
4. Click the Update Settings button.

Configuring via the Setup Mode Window

Using a Telnet Connection

To configure the unit over the network, establish a Telnet connection to port 9999.
Note:
Device Management window to establish the connection.
1. From the Windows Start menu, click Run and type the following command,
where x.x.x.x is the IP address and 9999 is the unit's fixed network configuration
port number.
No password is required to access the Setup Mode window via a
You can also use the Telnet to Device icon on the DeviceInstaller
Figure 3-5. Network Login Using Telnet
telnet x.x.x.x 9999
27
3: Configuring the Unit