Configuring Via The Setup Mode Window; Using A Telnet Connection - Lantronix SecureBox SDS1100 User Manual

SDS1100 User Guide
Figure 3-4. Server Properties Configuration on the Web Browser
3. In the Telnet Password field, enter a password to prevent unauthorized access
to the Setup Mode via a Telnet connection to port 9999. The password is limited
to 4 characters. (An enhanced password setting of 16 characters is available
under
Note:
serial connection.
4. Click the Update Settings button.

Configuring via the Setup Mode Window

Using a Telnet Connection

To configure the unit over the network, establish a Telnet connection to port 9999.
Note: You can also use the Telnet to Device icon on the DeviceInstaller
Device Management window to establish the connection.
1. From the Windows Start menu, click Run and type the following command,
where x.x.x.x is the IP address and 9999 is the unit's fixed network configuration
port number.
Note:
Security Settings on the Telnet Setup Mode window.)
No password is required to access the Setup Mode window via a
Figure 3-5. Network Login Using Telnet
telnet x.x.x.x 9999
Be sure to include a space between the IP address and 9999.
30
3: Configuring the Unit