Add The Unit To The Manage List; Opening A Configuration Window - Lantronix SecureBox SDS2100 User Manual

SDS2100 User Guide

Add the Unit to the Manage List

Now add the unit to the list of similar Lantronix devices on the network so that you
can manage and configure it. To perform this step, click the Search icon:
The device should be located by DeviceInstaller and added into the Device List. Now
you can manage (configure) the unit so that it works with the serial device on the
network.

Opening a Configuration Window

Once the device is added into the list, use the Configure, Upgrade, Telnet, and
Web icons to manage the device.
1. Do one of the following:
Note:
Setup Mode window in a Telnet session.
2. Continue with the appropriate configuration procedure described in the next
chapter.
Note:
you to save a configuration locally on your computer as a file. It is helpful
to save the file, in case, for example, someone changes the configuration
of the unit incorrectly. The Configure icon sends a saved file to the unit.
Figure 2-8. Device Management Window
To assign Expert settings and Security settings, you must use the
To configure the unit via a Web browser, click the Web icon. The Lantronix
WEB-Manager window displays in your browser.
To configure the unit via a Telnet session, click the Telnet icon. The Setup
Mode window displays.
The Configure icon on the Device Management window allows
21
2: Getting Started