Lantronix SecureBox SDS2100 User Manual page 19

SDS2100 User Guide
3. Enter the Hardware or Ethernet address of the device. The following Assign IP
Address window appears.
4. Select Assign a specific IP address to assign a static IP address to the device
or select Obtain an IP address automatically to enable BOOTP, DHCP, or
Auto IP on the device.
5. Click Next. The following Assign IP Address window appears.
Figure 2-4. Assign IP Address Window (Device Identification)
Figure 2-5. Assign IP Address Window (Assignment Method)
19
2: Getting Started