Other Options - Oce VarioPrint 1105 User Manual

2
2.2.3

Other options

The following options installed on the printer enables variable functions.
- Paper Source Option (PF-701) enables to select Tray 3, Tray 4 or Tray 5.
- Multi Folder Option (FD-501) enables to select "Punch", "PI Cover
Sheet", "Fold" function.
- Saddle Stitcher Option (SD-501) enables to select "Center Staple and
Fold" and "Trim", "Fold" function. Saddle Stitcher Option cannot be
installed when Stacker Option is installed.
- Stacker Option (LS-501 and/or LS-502) enables to stack of a lot of output
papers. Stacker Option cannot be installed when Saddle Stitcher Option
is installed.
- Stapler Option (FS-503) enables to select "Staple", "Offset" function.
- Installing the Perfect Binder (PB-501) allows you to make a roll-up
bookbinding.
Note
Installing various options built in the copier properly on the printer driver
allows you to use a variety of printing functions shared by the copier.
Refer to "Option tab" on page 4-15, "Device Settings tab" on page 5-14,
"Option tab" on page 6-17, "Configure dialog box" on page 7-56 and
"Printer Info" on page 8-45 for more information about installation of
options.
2-6
Copier
FS-503 SD-501 FD-501
Overview
PF-701
VarioPrint 1105