Oce VarioPrint 1105 User Manual page 362

7
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. You can use this when printing a large volume document, such as
multiple sets of pages.
Using the Wait Mode, you can store a print job in the copier built-in hard disk
as image and can output it again when required.
1
Open the file to be printed and select [File] - [Print] of application.
the [Printing] dialog box will appear.
2
Select [Printer Specific Options (2)]
3
Click [Wait Mode] to display the list. Then select [Wait Mode] or [Proof
and Print].
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
4
Click [Print].
– When [Wait Mode] is selected, it stops without being printed.
– When [Proof and Print] is selected, only one part is printed and it
stops.
– When the Mode Check screen is not displayed, press [MACHINE]
tab.
On the copier's control panel, the Mode Check screen appears.
7-50
PostScript PPD Printer Driver setting (Mac OS 9)
VarioPrint 1105